 |
|
TPP-SR-BG0001
Silicone BALL GAGS
They are softer then they look. Our
customers have reported being able to keep them in the mouth for longer
then many other balls used. I know the models I have worked with have
surprised me how long they could keep the ball in their mouth - the
sessions were usually over before they asked to have it come out.
These ball gags use FDA approved silicone* and the strap can be removed,
which makes cleaning them easier.
The balls are available in 8 different colors and 3 different sizes
providing 24 variations.
- We can make custom 3/4" and 1/2"
custom straps.
- The straps can be made in almost any kind of leather we have available
and we can use most tongued buckles.
- By default the strap will be high-quality black leather with a locking
roller buckle and approximately 22" (560mm) in length.
- We can also make straps that are smaller then 1/2", however 1/2" is
the smallest strap size we can make with a locking buckle and 3/8ths is
the smallest at the buckle point. Straps smaller then 3/8th's will not
be warranted.
- Custom leather straps that are smaller at the mouth and larger at the buckle
can also be made for additional cost.
We recommend that Gags should be one person items only and thus
we sell them "As Is"
Pricing:
$25 TPP-SR-BG0001S# One 1 1/2"
(Small) Ball Gag and leather strap.
$25 TPP-SR-BG0001M# One 1 3/4"
(Medium) Ball Gag and leather strap.
$25 TPP-SR-BG0001L# One 2 1/8"
(Large) Ball Gag and leather strap.
# = Color selection
$10 TPP-SR-BG0001A Replacement Strap
(please specify color and desired size, colors will be closest
available)
**New Aug 2009**
$35
TPP-SR-BG0005S/M/L# With Black PVC Rubber Strap
(note: size is limited at this time to
3/4" width, however we are no longer limited on length. See pictures
below)
$15 TPP-SR-BG0005A Black PVC Rubber Replacement Strap
Available colors for balls (contact for availability):
K=Black
Y=Yellow
G=Green
B=Blue
M=Purple
R=Red
P=Pink
W=White |
Measurements for ball gags: the straps are made to order, the
default size fits most people, but will have 7 or 9 holes depending on
buckle.
To measure we recommend using a
piece of thick string or yarn and measuring with the mouth open and then laying
the string down onto a ruler to determine the needed strap length.
For which size ball is recommended
(with the caveat this is only a guess):
Open mouth width less than 2 1/4" or Height less than 1 1/4" = small at
most.
Open mouth Width 2 1/2" and Height of 1 1/2" then Medium about right.
Open mouth Width of 3" and height of 2" then large should be okay.
Reduce size if the gagee might have any jaw problems.
UZima with large Pink ball gag and original strap (Pleasure Paradox Strap shown
above).
|
|
BG0001SR Small Red Ball Gag with Pleasure Paradox default strap on Chay.
Variation BG0002SR with sparkle rivets on Chay (note: ball will not come off of
strap with the rivets in place. Add $1 for each pair of sparkle rivets
(one each side of ball )).
BG0005MR Medium Red Ball Gag with PVC Rubber Strap on Max Mikita.
BG0002MB_Flame Medium Blue Ball gag with Tapered Strap on Jody.
This is an example of a tapered strap in this case with a Flame cut
pattern on the side. This one is 3/8th at the mouth and 1 1/4" at the
buckle, with a Medium Blue ball.
|
Melissa with medium ball gag and original strap
BG0005MG on Porshia (you can make out the shiny reflections and the
water drops on the PVC rubber - taken in a shower) |
|
More Background:
The balls are made in the U.S.A. by Flashington's
Ball Gags. We like the balls themselves, but not the straps. We had
looked for balls that met our standards so we could provide custom
straps allowing for a set that is matching in every part. So we made an
agreement with Flashington to get a discount in the balls themselves so
we could afford to make the straps. The agreement sets a price equal to
what Flashington charges for a single ball gag.
Cleaning:
The ball itself can be cleaned in boiling water or using rubbing or
isopropyl alcohol. The alcohol is recommended for routine cleaning and
is what the manufacturer uses. The leather strap however has to be treated as
any leather product is, but since the strap can be removed it makes it
easy to treat separately.
Trivia:
- K for black and M for Purple are used because CMYK is a photographer's
term, which Longwatcher is and M=Magenta, which Purple is closest to
Magenta and K is for Black or the black/white intensity value.
*=According to the manufacturer. |
| |
|
|
